Client: Stream Oil-Canada – (Click here to see the brochure)
The scope of the survey was to delineate the producing reservoir and obtain a 3D model of the area indicating position of future wells.
40 LandTech’s passive stations were installed and operated for a few months all over the block and the recorded microearthquakes were used to provide all the required information to the client.
In the figure below we depict the general correlation of the obtained PST data with the prevailing geology and tectonics in the region. The agreement is excellent.
The figure below presents some PST vertical cros ssections along the exploration block. The locations of the oil and gas fields are also presented.
A Vp/Vs vertical crossection obtained from the PST survey is depicted in the figure below
Horizontal Vp and Vp/Vs cross sections obtain from the PST survey at a spacing of 500m are presented in the following figure.
The correlation of PST Vp results (@3.5Km) with isodepths of wells are shown below
An example of an interpreted 2D section of PST Vp results is presented in the following figure